An explanation to each of the settings can be found in the EXPLANATION OF GCODE SETTINGS.Following this guide will ensure your successful first print journey.Together with Flashforge team, lets turn the sky into limit.
Nozzle Pro Software Working Guide Pro Is EarthedEnsure that your Creator pro is earthed lest electrostatic interference.
Turn off the machine and unplug the power cord before any maintenance or modifications. Take the transparent lid together with two rolls of filament out from the printer. ![]() Filament mounted on the right spool holder when viewed from the back should always unspool clockwise and filament loaded onto the left spool holder should always unspool counterclockwise. Choose The Replicator Dual for Creator Pro dual extruder machine. After selecting the appropriate machine type, click on GCode on the top navigation bar, and under GCode Generator, select Skeinforge(50). Click File Open, then browse and select the file (.STL) that you would like to print. EXPLANATION OF GCODE SETTINGS A new window will pop up, giving you several options on how the Gcode will be generated: A. Slicing Profile: select Replicator slicing defaults for ABS printing, then select Replicator 2 slicing defaults for PLA printing. For ABS printing, 80 is recommended; for PLA printing, 100 recommended. I. Print Temperature is the temperature to which the nozzle is heated. Navigate to the Python installation directory, and select python.exe and click Open. The USB port on the machine is bound by the box in the below image. Nozzle Pro Software Working Guide Software As WeAfter connecting the cable, open the ReplicatorG software as we are going to link the computer and printer. Nozzle Pro Software Working Guide Driver Software OnClick Driver Software on the top and then and click Update Driver Software. Left click drivers. And then click FTDI USB Drivers in the driver folder before confirmation and click OK. Click on the printer connect icon highlighted in blue: If the printer connect icon turns dim, as shown in the illustration below, the printer has successfully connected to the computer. In the same set of menu, click on the cross-shaped icon and a new interface will appear. When the extruder temperature reaches 50C, the cooling fan will be activated and the current temperature value will display to the right as shown below. Once the machine reaches this point, you will feel the filament being pulled into the extruder head. Turn on the Creator Pro; the display will indicate: Print from SD Preheat Utilities 2. Please do as following shown to avoid filament jam. Turn on the Creator Pro, the display will indicate: Build from SD.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |